Installation Guide

ManualsBrandsArrow ManualsStorage & OrganizationYard Saver 4 ft. x 7 ft. Storage Shed

 9796 Ramp (1)

 9795 Floor Frame (2)

 8977 Side Floor Frame (2)

 Parts Needed For 

Floor Frame Assembly

Step 2

BR15

The ﬂ oor frame must be square

and level or holes will not align.

2 Assemble the four corners of the

ﬂ oor frame using two screws at each

corner as shown.

3 Measure the ﬂ oor frame diagonally.

When the diagonal measurements

are equal, the ﬂ oor frame is square.

NOTE

If using a wood platform or

concrete slab do not fasten the

ﬂ oor frames to your base at this

time. You will anchor the

building after it is erected.

Level

STEP

3

When Diagonal Measurements

are Equal the Floor Frame

is Square.

1 Center the ramp on top of the ﬂ oor

frame. Note that the door can be

installed on either end. Join the

frames by inserting four screws.

8977

RIGHT

REAR

9795

1

STEP

STEP

2

9796

FRONT

9795

8977

15