Installation Guide

ManualsBrandsArrow ManualsStorage & OrganizationYard Saver 4 ft. x 7 ft. Storage Shed

Step 3

BR16

 Parts Needed For 

Corner Posts/Rear Siding

 9793 Corner Post (2)

 8075 Rear Siding (1)

STEP

1 Fasten two corner posts to the

rear corners of the ﬂ oor frame as-

sembly using four screws.

2 Position one rear siding, starting

at rear frame, between corner posts

and fasten with six screws. Always

use washers under the heads of

fasteners where they are shown!

Each siding panel has a bottom edge

and a ﬂ at edge. The bottom edge

always overlaps the ﬂ at edge. Keep

the ﬂ at edge up. Do not fasten ﬂ at

edge now.

NOTE

The remainder of the building assembly

requires many hours and more than one

person. Do not continue beyond this

point if you do not have enough time to

complete the assembly today. A partially

assembled building can be severely

damaged by light winds.

STEP

1

Remove &

Replace

Rear Floor Frame

8075

2

9793

9793

FRONT

CORRECT

INCORRECT

16