Installation Guide

Step 8
BR21
Parts Needed For
Side Siding/Foam Tape
8074 Side Siding (2)
STEP
Installing the siding to the roof is
best done with a step ladder.
1 After the 3rd side siding is fas-
tened to the 2nd, roll it over on the
roof and fasten as before.
2 Apply gray foam tape along lower
bottom edge of the 4th side siding
by removing protective paper and
pressing on edge of leg. Cut tape
to proper length.
3 Fasten 4th side siding to the 3rd
but do not fasten top edge at this time.
NOTE
Measure the building diagonally
again and make adjustments to
make sure the building is square.
This will make the siding fi t better,
and holes will align.
4th Side Siding
STEP
1
2
Do not fasten top
edge at this time
Roll Side Siding over
onto Roof
8074
Foam
Tape
Protective
Paper
Apply Gray Foam Tape
Foam Tape
STEP
3
Gray
Foam
Tape
End
View
8074
21