Installation Guide

 8073 Top Siding (1)
 8080 Peak Trim (1)
 8078 Right Wall Trim (1)
 8079 Left Wall Trim (1)
 8076 Right Roof Trim (1)
 8077 Left Roof Trim (1)
 Parts Needed For 
Top Siding/Trim
Step 9
BR22
8079
8077
FRONT
STEP
STEP
2
1 Fasten remaining top siding
(5 board), to the top side of building.
2 Fasten peak trim to peak of roof
using screws thru siding into frame.
3 Apply foil tape by overlapping sid-
ing by 1/2" (13 mm), pressing fi rmly
into contour of siding, from top to
bottom of gables. Rub for good ad-
hesion. Do not cut tape, let roll hang
free until ready to use on next panel.
When complete, press opposite side
down to gable. The purpose of this
is to seal out the weather.
4 Fasten right and left wall trim to
side corners of building using screws.
5 Fasten right and left roof trim
to the ends of roof, overlapping wall
trim, using screws.
6 Fasten right and left facia caps
at the breaks in the roof trim, using
screws.
3
STEP
8080
STEP
8078
Facia Cap
Foil Tape
8076
1
6
8073
4
STEP
5
STEP
22