Instructions / Assembly

●●
●●
● 9796 Ramp (1)
●●
●●
● 9795 Floor Frame (2)
●●
●●
● 8977 Side Floor Frame (2)
● Parts Needed For ●
Floor Frame Assembly
Step 2
BR15
The floor frame must be square
and level or holes will not align.
15
2 Assemble the four corners of the
floor frame using two screws at each
corner as shown.
3 Measure the floor frame diago-
nally. When the diagonal measure-
ments are equal, the floor frame is
square.
NOTE
If using a wood platform or
concrete slab do not fasten the
floor frames to your base at this
time. You will anchor the
building after it is erected.
Level
STEP
3
When Diagonal Measurements
are Equal the Floor Frame
is Square.
1 Center the ramp on top of the floor
frame. Note that the door can be
installed on either end. Join the
frames by inserting four screws.
8977
RIGHT
REAR
9795
1
STEP
STEP
2
9796
FRONT
9795
8977