User Manual

Table Of Contents

The suggested control throw setting for the Pioneer are as follows (dual rate setting):

Tip: The maiden flight should always be

flown using low rates, fly the aircraft until you

are familiar with its characteristics prior to

trying high rates. Make sure the aircraft is

flying at altitude and adequate velocity prior

to using high rates, as the aircraft will be

sensitive to control inputs with the larger

control surface movements.

12mm up / downElevator

Aileron

Rudder

10mm up / down

8mm left / right

12mm up / down

10mm left / right

Preflight check

transmitter and model setup

Control throws

After assembly and prior to your first flight, make sure all control surfaces respond correctly to your transmitter by referring

to the diagram below.

Finding the center of gravity

Finding the correct center of gravity is critical in ensuring that the aircraft

performs in a stable and responsive manner. Please adjust the weight

distribution so the aircraft balances in the range stated on the diagram.

• Depending on the capacity and weight of your chosen flight

batteries, move the battery forward or backward to adjust the

center of gravity.

• If you cannot obtain the recommended CG by moving the battery to a

suitable location, you can also install a counterweight to achieve correct

CG. However, with the recommended battery size, a counterweight is not

required. We recommend flying without unnecessary counterweight.

35mm