Certifications

ManualsBrandsArsuite ManualsBed & BathMackenzie 2" Down Feathers Mattress Topper

Comfort Proof

Buffalo, NY

United States

Sample Type: Feather Bed

Shipped By: SF 349814520294

Label: Hungarian White Goose Down (Minimum 5%)

Sample Identification: HGOOSE™ - Down Top Hungarian Featherbed

Final Test Report

CNAS Accredited

CMA Accredited

This analysis represents (within normal testing variances) the test results from the sample(s) submitted. The analysis may not represent the entire lot, batch

or production run. In no event shall IDFL be responsible or liable for any direct, indirect, punitive, incidental, special, or consequential damages whatsoever

arising out of or connected with the use of, misuse of, or reliance upon such results or analysis. This test report is subject to the Terms and Conditions found

at www.idfl.com.

IDFL LABORATORY AND INSTITUTE Approved By

IDFL SALT LAKE

1455 South 1100 East

Salt Lake City, UT 84105

USA

+1 801 467 7611

info@idfl.com

IDFL EUROPE AG

Zürcherstrasse 282

CH-8500 Frauenfeld

Switzerland

+41 52 765 1574

europe@idfl.com

IDFL CHINA

Tonghui Mid-Road 688, Xiaoshan

Hangzhou Zhejiang 311200

China

+86 571 8273 6561

china@idfl.com

IDFL TAIPEI

2F., No. 163 Sec. 2, Wenhua Rd.

Banqiao District, New Taipei City

Taiwan

+886 2 2259 1178

taiwan@idfl.com

www.idfl.com

Client 12443

Sample 2 of 4

Page 1 of 7

Summary of content (7 pages)

PAGE 1
Final Test Report Comfort Proof Buffalo, NY United States Sample Type: Shipped By: Label: Feather Bed SF 349814520294 Hungarian White Goose Down (Minimum 5%) Sample Identification: HGOOSE™ - Down Top Hungarian Featherbed 1 CNAS Accredited CMA Accredited This analysis represents (within normal testing variances) the test results from the sample(s) submitted. The analysis may not represent the entire lot, batch or production run.
PAGE 2
Final Test Report Test Orders Summary Test Test Component Result Expected Value Content IDFB Part 3 2013 Down Clusters 2.9% - Total Goose 97% - Total Duck 3% - Final Fill Power Volume 400 in³/30g - Species Down & Feathers IDFB Part 12 2013 Steam Fill Power IDFB Part 10-B 2015 Oxygen IDFB Part 7 2013 Oxygen 2.4 mg/100g - Turbidity IDFB Part 11 2013 Turbidity Glass Tube 1000 mm - Air Permeability ASTM D737 2018 Air Permeability 6.
PAGE 3
Final Test Report Content IDFB Part 3 2013 1, 2 Down Clusters 2.9% Down Fibers 0.5% Waterfowl Feather Fibers 0.3% Waterfowl Feathers 93.5% Broken and Damaged Waterfowl Feathers 1.6% Quill 0.0% Landfowl 0.0% Residue 1.2% Total 100.
PAGE 4
Final Test Report Steam Fill Power IDFB Part 10-B 2015 1, 2 Volume 400 in³/30g Oxygen IDFB Part 7 2013 1, 2 Oxygen 2.4 mg/100g Turbidity IDFB Part 11 2013 1, 2 Turbidity Glass Tube 1000 mm Turbidity NTU 1.04 NTU 1 CNAS Accredited CMA Accredited This analysis represents (within normal testing variances) the test results from the sample(s) submitted. The analysis may not represent the entire lot, batch or production run.
PAGE 5
Final Test Report Odor IDFL 30 2018 CHECK-IN 1. ODOR UPON ARRIVAL : Odor upon opening of shipping box Normal 2. INITIAL ODOR of SAMPLE : Odor of sample after removal from shipping box and any packaging material (such as plastic, etc.) Normal 3. LATER ODOR of SAMPLE : (24 hours after removal from packaging) N/A 4. ODOR of PACKAGING : (Any odor that might exist in packaging) Normal OPENING ROOM 5. INITIAL ODOR - FILL MATERIAL : Odor of fill material immediately after cutting open samples Normal 6.
PAGE 6
Final Test Report Net Fill IDFB Part 17 2013 Gross Weight 4799.2 g Shell / Case Weight 1042.9 g (21.7% of Gross Weight) Net Fill 3756.3 g (78.3% of Gross Weight) Net Fill: 132.5 oz Fill Rate: 311.5 gsm Air Permeability ASTM D737 2018 Air Permeability 6.446 ft³/ft²/min Size Check IDFL 244 2016 Width 59.1 in Length 79.1 in Height 1.6 in 1 CNAS Accredited CMA Accredited This analysis represents (within normal testing variances) the test results from the sample(s) submitted.
PAGE 7
Final Test Report Fiber Analysis: Qualitative AATCC 20 2013 outer shell Fiber Analysis 100% Cotton USA-2000 Labeling Standard - Down & Feather Products USA Evaluation Component Test Test Component Requirement Result Finding Oxygen IDFB Part 7 2013 Oxygen Max 10 mg/100g 2.4 mg/100g Pass Turbidity IDFB Part 11 2013 Turbidity Min 300 mm 1000 mm Pass Steam Fill Power IDFB Part 10-B 2015 Fill Power Basic Fill Power Claim 400 in³/30g - Oxygen Max 4.8 mg/100g 2.