Manualshelf

Instructions / Assembly

ManualsBrandsArt Decor ManualsCurtain RodsTekno 25 - 48 in. Non-Adjustable 1-1/8 in. Single Traverse Window Curtain Rod Set in Black with Jiboo Finial
123
STEP 7 - Cord Draw Systems, Installing Pulley
1. Attach pulley to cord. Stretch pulley until cord is tight. It is
not necessary to use excessive tension. Mark spot with pencil
on wall or fl oor. Remove cords and install pulley then
re-install cords.
• THE PULLEY MUST BE INSTALLED. IT IS THE LAW.
FAILURE TO DO SO CAN RESULT IN
INJURY TO CHILDREN OR PETS!
2. IF NEEDED - To adjust CONTROL cord drop, pull cord through
master carrier until pulley is at desired height. Pull cord an extra
few inches and knot cord at proper spot.
When you install the pulley the cord will slide back into place.
STEP 5 - Hand draw systems
1. Install Finials, and then click in carriers.
2. Attach Fling Rod to side of drape you wish to operate from,
by clipping it into fi rst carrier.
3. Use plastic plug to lock last carrier in place so end of drape
does not move when the drape is closed.
STEP 6 -
Installing regular carriers (corded system)
1. Install Finials, and then click in carriers.
2. For center opening tracks greater than 84”, click in plastic
plug at center point of rail.
PLUG