Specifications

08
3.POPULAR OPTIONS
www.blitzrcworks.com
Press the menu button to enter into Set menu. There are 5 sub menus that include
D'R, Exp, Epa, Gyr, and Mrv.
D'R (Dual Rate) settings:
1. Press the sub button
2. Press the left or right button to choose a channel (aileron, elevator, or rudder).
3. Press the Y/UP or N/DOWN button to increase or decrease the value input.
The values set take effect when the D'R switch is switched on. The Dual Rate
exponential curve may be set anywhere between 0% and 125%.
Exponential settings:
1. Press the sub button to get to the Exp menu (exponential settings).
2. Press the left or right button to choose a channel.
3. Press the Y/UP or N/DOWN button to increase or decrease the value input.
The exponential curve may be set to anywhere between -100% and 100%.
EPA (End Point Adjustment):
1. Press the sub button to go to the Ep menu.
2. Press the left or right button to choose a channel.
Negative symbol signifies minus and the positive symbol means plus or add.
The values may be set anywhere between -100% and 100%.
The “Ep-“corresponds to to one half trip of the stick while the Ep+ corresponds
to the other half. Appropriate settings of the Ep can achieve a 3 point curve of any
channel.
Gyroscope sensitivity/ landing gear setting:
1. Press the sub button to enter into the Gry menu (gyro mixing).
2. Press the left or right button to choose a channel.
“d” means channel 5 switch is down and “u” means channel 5 switch is up.
3. Press Y/UP or N/DOWN button to increase or decrease the value.
This value may be set anywhere between -100% and 100%.
Mixing rate settings:
In A,V, D mode
1. Press the sub button to inter into the Mrv menu (mixing rate settings)
2. Press the left or right button to choose an option.
A is for aileron, E for elevator, and R for rudder.
3. Press Y/UP or N/DOWN button to increase or decrease the setting value.
The value -100% to 100% indicates the actual output mixing rate.