User Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS - READ FIRST
- This symbol, wherever it appears, This symbol, wherever it appears, alerts
- alerts you to the presence of uninsulated you to important operating and
- dangerous voltages that may be sufficient maintenance instructions in the
- to constitute a risk of shock. accompanying literature. Please read
- the manual.
- OVERVIEW
- CONNECTIONS
- OPERATION
- APPLICATION
- BLOCK DIAGRAM
- WARRANTY INFORMATION
- SERVICE
- SPECIFICATIONS
5
CONNECTIONS
All connections are made through 1/4-inch TS (mono) jacks
whose function is labeled on the top of the unit. Use shielded
cables with 1/4-inch TS (two conductor) plugs to connect to
these jacks.
INPUT
Plug your instrument (guitar, bass, or keyboard) or other signal
source into this jack.
THRU
This jack provides a direct hard-wired connection to the input
jack which is not affected by any switch function. Use it to
connect to an electronic tuner or to provide an extension to
your input cable.
OUTPUT A
Use this jack to connect to your main amplifier or channel.
OUTPUT B
Use this jack to connect to your secondary amplifier or channel.
The functions controlled by the rocker switches on the front
panel are applied to this output.