User Manual

SPECIFICATIONS

Input Connections XLR female balanced (MIC)

1/4-inch TS unbalanced (CH 1-8, Effects Return)

1/4-inch TRS stereo unbalanced (EFX BUS IN, Main Expand)

Output Connections XLR male balanced (Main)

1/4-inchTS unbalanced (Effects Send)

1/4-inch TRS stereo unbalanced (Monitor, Main Expand, Headphone)

Input Impedance 1k Ohms (MIC), 5k Ohms (CH 1-8)

Output Impedance <1k Ohms (Main, balanced), <25 Ohms (Headphone)

Frequency Response 20 Hz – 20 kHz (+0, -1 dB) (CH 1-8 in, Main out)

THD <0.01% @ 1 kHz

Phase Response All connections are phase coherent

Signal to Noise Ratio >90dB typical (Ref 0dBu)

Equivalent Input Noise -120dBu typical (XLR balanced, max gain), -100dBu typical (1/4")

Maximum Input Level -19dBu (MIC), +24dBu (CH 1-8)

Maximum Output Level +24dBu (Main), +18dBu (Monitor, Effects Send)

Maximum Gain +60dB (MIC), +14dB (CH 1-8)

Phantom Power Switch selectable, +48V DC, filtered, current limited

Chassis Type All steel black finish

Power Requirements USA: 95-125 VAC, 50-60 Hz, <15W

Export units configured for country of destination

Dimensions (HWD) 1.75-inch x 19-inch x 6-inch

44.5mm x 483mm x 152mm

Weight 6.5 lbs. / (2.95 kg)

Note: 0 dBu = 0.775Vrms

ART maintains a policy of constant product improvement. ART reserves the right to make changes

in design, or make additions to, or improvements upon, this product without any obligation to install

same on products previously manufactured. Therefore, specifications are subject to change without

notice.