User`s guide
Storing/Naming Programs
Before we get into editing programs and creating your own, let’s learn how to store changes so you won’t lose any modifications you’ll want to
keep. The Store procedure allows you to rename, relocate and save any modifications you have made to Programs so that they can be recalled
later.
1. Press the <Store> button once. The display shows the current program name (which may look something like this):
A cursor appears under the first character of the Program name
Naming the Program
1. Using the <Program/Effect> wheel, change the character to the one you want in the selected position.
2. When the correct character is displayed in that position, use the <Page> knob to scroll the cursor to the next character you want
to change.
3. Use the <1> knob to change the letter’s case. The <2> knob is used to select numbers, The <3> knob is used to insert spaces.
The <4> knob is used to copy and paste characters.
4. To copy a character, position the cursor under the character you want to copy (using the <Page> knob), then turn the <4>
knob clockwise. To paste the copied character, position the cursor where you want to paste the character, then turn the <4>
knob counter-clockwise.
5. To abort the Store and Name procedure, push either the <Program> button to take you to Program mode, the <Edit> button
to take you to FX Edit mode, or the <Utilities> button to take you to Utility mode, depending upon which mode you want to
enter.
Name: Satch 2
2
USER
%kHz
msdB
CAP
1
CHANGEDLINK
nbr
2
CHANGEDLINK
%kHz
msdB
InS
3
CHANGEDLINK
%kHz
msdB
COp
4
CHANGEDLINK
PAGE
1
OF
1
COMP WAH TUBE EQ
L/R OUTS
DIGITAL
#
b
GATE
SEAMLESS
BANK
Section - 2 Setting Up
2120 VGS Artist
User Guide
20