User`s guide
Editing a Module
Your 2120 VGS comes loaded with a vast menu of Factory Effect Defaults for your use. In any given situation, however, you may want to make
minor adjustments to the selected module. The parameters of each Effect module are reached through a series of pages.
1. Press the <Edit> button. The display looks something like this:
2. When you first enter FX edit mode (by pressing the <Edit> button), you are taken to the Tube distortion module in the Preamp
section. Turn the <Program/Effect> wheel to scroll through the modules until you reach a digital effect module. Notice that as
you scroll through the different modules, the currently selected module will flash in the Effect routing matrix. Once you have
reached a module in the digital effects section that you want to edit, use the <Page> knob to scroll through the modules
parameters.
Notice: Anytime a change is made to either an Effect module or Default, the
Changed icon will appear directly below the effected
parameter within the module or default.
Scrolling through a Module’s Pages
Notice in the bottom left corner (just under the program number) that the display indicates which page you are on and the total number of
pages within the module. Each page allows you to access up to four parameters using the <1> - <4> knobs.
Example:
To scroll through the parameter pages of an effect module, press the <Edit> button. Once this button is lit, use the
<Program/Effect> wheel to scroll to an effect module. At this point use the <Page> button to scroll through the parameters of the
effect module.
For a description of all the FX modules and their parameters, see pages 27-47.
Tube Dist BrightCln2
4
FACTORY USER
%kHz
msdB
On
1
CHANGEDLINK
%kHz
msdB
2
CHANGEDLINK
%kHz
msdB
LINK
%kHz
msdB
F 5
4
LINK
PAGE
1
OF
2
COMP WAH TUBE EQ
L/R OUTS
DIGITAL
CLIP
#
b
GATE
SEAMLESS
BANK
EQDIST
Section - 3 Editing Programs
2120 VGS Artist
User Guide
26