User`s guide

4. Now turn the <1> knob to make the Preamp active for morphing assignment or if the Volume pedal is to be used and is selected at this
point. Once this is done, press the <Assign> button and the display will appear something like this if this parameter has not already
been assigned:
5. Now select the Expression pedal, and the display will appear something like this if the Morphing parameter has been selected:
6. The <1> knob lets activate or de-activate the selected expression pedal. The <2> knob lets you change the selected pedal. The <3>
and <4> knobs are used to set the minimum and maximum morphing levels between the Tube (
t
) and the Solid State (
d
digital). Once
you have made this assignment, make sure to save your changes by pressing the button.
6-b. If the Volume Control parameter has been selected, the display will appear as follows:
6-c. The <1> knob lets activate or de-activate the selected expression pedal. The <2> knob lets you change the selected pedal. The <3>
and <4> knobs are used to set the minimum and maximum volume levels. Once you have made this assignment, make sure to save
your changes by pressing the button.
Morph Exp 1 Min [100]Max
2
FACTORY USER
On
1
CHANGEDLINK
PdL
2
CHANGEDLINK
Off
3
CHANGEDLINK
100
4
PAGE
4
OF 19
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
EQDIST
Morph Exp 1 Min [t50]Max
2
FACTORY USER
On
1
CHANGEDLINK
PdL
2
CHANGEDLINK
d50
3
CHANGEDLINK
t50
4
PAGE
3
OF 19
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
EQDIST
Select a Contrl F.Switch
2
FACTORY USER
CHANGEDLINK CHANGEDLINK CHANGEDLINK
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
EQDIST
Volume Pdl: Morphing
2
FACTORY USER
tSO
1
CHANGEDLINK

2
CHANGEDLINK
3
3
CHANGEDLINK
4
PAGE
2
OF 2
COMP WAH TUBE EQ
L/R OUTS
L/R OUTS
#
b
GATE
BANK
EQDIST
2120 VGS Artist
User Guide
Section - 6 Advanced Topics
61