Owners Manual

11
SPECIFICATIONS
Input Connections XLR female balanced (MIC)
1/4" TS unbalanced (CH 1-8, Effects Return)
1/4" TRS stereo unbalanced (EFX BUS IN, Main Expand)
Output Connections XLR male balanced (Main)
1/4" TS unbalanced (Effects Send)
1/4" TRS stereo unbalanced (Monitor, Main Expand, Headphone)
Input Impedance 1k Ohms (MIC), 5k Ohms (CH 1-8)
Output Impedance <1k Ohms (Main, balanced), <25 Ohms (Headphone)
Frequency Response 20 Hz – 20 kHz (+0, -1 dB) (CH 1-8 in, Main out)
THD <0.01% @ 1 kHz
Phase Response All connections are phase coherent
Signal to Noise Ratio >90dB typical (Ref 0dBu)
Equivalent Input Noise -120dBu typical (XLR balanced, max gain), -100dBu typical (1/4")
Maximum Input Level -19dBu (MIC), +24dBu (CH 1-8)
Maximum Output Level +24dBu (Main), +18dBu (Monitor, Effects Send)
Maximum Gain +60dB (MIC), +14dB (CH 1-8)
Phantom Power Switch selectable, +48V DC, filtered, current limited
Chassis Type All steel black finish
Power Requirements USA: 95-125 VAC, 50-60 Hz, <15W
Export units configured for country of destination
Dimensions (HWD) 1.75" x 19" x 6"
44.5mm x 483mm x 152mm
Weight 6.5 lbs. (2.95 kg)
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement. Therefore, specifications are subject to
change without notice.