User Guide

- 13 -

SLA-1 SPECIFICATIONS

Dimensions 1.75”H x 19.0” W x 9.5”D

Weight 13.2 lbs., 6.0kg.

Input Connections XLR(balanced), ¼”TRS(balanced/unbalanced)

Output Connections Multi-Way Binding Post

Input Impedance XLR, ¼” 44k ohms (balanced), 22k ohms (unbalanced)

Input Sensitivity 1V for Full Power Output into 8 ohms

Stereo Output Power, 8 ohms 100Watts RMS per Channel,

Stereo Output Power, 4 ohms 130Watts RMS per Channel

Stereo Output Power, 16 ohms 55Watts RMS per Channel

Stereo Output Power, 5.5 ohms 114Watts per Ch, 25V line, unbalanced, direct

Bridged Output Power, 8 ohms 260Watts RMS mono

Bridged Output Power, 16 ohms 175Watts RMS mono

Bridged Output Power, 28 ohms 175Watts mono, 70V line, balanced, direct

Minimum Load Impedance, Stereo 4 ohms (normal operation) , stable to 2 ohms

Minimum Load Impedance, Mono 8 ohms (normal operation) , stable to 4 ohms

CMRR >60dB (typical @ 1kHz)

Frequency Response 10Hz to 40kHz, +/- .5dB

Hum and Noise >100dB below clipping

Total Harmonic Distortion (THD) <0.05% (typical)

Slew Rate >20V/uS

Damping Factor >100

Transformer Type Toroidal

Power Requirements USA –120VAC 60Hz 600WATTS(max.)

JAPAN –100VAC 50Hz 600WATTS(max.)

EUROPE –220VAC 50Hz 600WATTS(max.)

AUSTRALIA 240VAC 50Hz 600WATTS(max.)

Export units configured for country of

destination.

ART maintains a policy of constant product improvement. ART reserves the right to

make changes in design or make additions to or improvements upon this product

without any obligation to install same on products previously manufactured. Therefore,

specifications are subject to change without notice.

Applied Research & Technology

215 Tremont Street

Rochester, NY 14608 USA

(585) 436-2720

(585) 436-3942 (FAX)