User's Manual

II
IMPORTANT SAFETY INSTRUCTIONS - READ FIRST
This symbol, wherever it appears, This symbol, wherever it appears, alerts
alerts you to the presence of uninsulated you to important operating and
dangerous voltages inside the enclosure maintenance instructions in the
that may be sufficient to constitute a risk. accompanying literature. Please read
of shock the manual.
Read instructions Retain these safety and operating instructions for future reference. Heed
all warnings printed here and on the equipment. Follow the operating instructions printed in
this user guide.
Do not open (except to convert the 1/4-inch jacks from inputs to outputs. See page 4.) There
are no user serviceable parts inside. Refer any service work to qualified technical personnel
only.
Power sources Only connect the unit to mains power of the type described in this user guide
or marked on the rear panel. The power source must provide a good ground connection.
Power cord Use the power cord with sealed mains plug appropriate for your local main
supply as provided with the equipment. If the provided plug does not fit into you outlet consult
your service agent. Route the power cord so that it is not likely to be walked on, stretched or
pinched by items placed upon or against.
Grounding Do not defeat the grounding and polarization means of the power cord plug. Do
not remove or tamper with the ground connection on the power cord.
Moisture To reduce the risk of fire or electrical shock, do not expose the unit to rain,
moisture or use in damp or wet conditions. Do not place containers of liquid on it, which may
spill into any openings
Heat Do not locate the unit in a place close to excessive heat or direct sunlight, as this could
be a fire hazard. Locate the unit away from any equipment which produces heat, such as
power supplies, power amplifiers and heaters.
Environment Protect from excessive dirt, dust, heat, and vibration when operating and
storing. Avoid tobacco ash, drink spillage and smoke, especially that associated with smoke
machines.
Handling Protect the controls from damage during transit. Use adequate padding if you need
to ship the unit. To avoid injury to yourself or damage to the equipment, take care when lifting,
moving or carrying the unit.
Servicing Switch off the equipment and unplug the power cord immediately if it is exposed to
moisture, spilled liquid or the power cord or plug becomes damaged during a lightning storm
or if smoke odor or noise is noted. Refer servicing to qualified technical personnel only.
Installation Install the unit in accordance
with the instructions printed in the user guide.