User`s manual

10
SPECIFICATIONS:
Frequency Response: 10Hz –40kHz (+0, -1dB)
Dynamic Range: >100dB (20Hz to 20kHz)
THD: <0.05% (typical)
CMRR: >60dB (typical)
Equivalent Input Noise: -130dB (XLR to XLR ‘A’ weighted)
Maximum Input Level: +16dBu (XLR)
+17dBu (1/4”)
Maximum Output Level: +26dBu (XLR)
+20dBu (1/4”)
Input Connections: ¼” unbalanced (1meg Ohm),
XLR balanced
Output Connection: ¼” unbalanced (600 Ohm),
XLR balanced (<300 Ohm)
Maximum Gain: 70dB (XLR to XLR)
50dB (1/4” to XLR)
Input Gain Switch: 20dB
XLR Input Impedance: 4.7k Ohms / 600 Ohms, Switch selectable
High Pass Filter: -3dB @ 40Hz, Switch selectable
Output Phase: Normal / Invert, Switch selectable
Output Limiter Type: Fast FET limiter, >20dB range, (+6dBu XLR, 0dBu ¼”)
Phantom Power: +48V DC, Filtered, Current limited
Signal Metering: Precise LED array, Fast attack, Musical release
30dB range, -15dB, -7dB, 0dB, Clip(+15dB)
Tube Type: 12AX7A hand selected
Chassis Type: All Aluminum black anodized with integral rubber sides
Power Requirements: 10Volts AC @ 700ma (typical)
Dimensions: 1.75”H x 5.9”W x 6.5”D (44.5mm x 150mm x 165mm)
Weight: 2.5 lbs. (1.14 kg)
Note: 0dBu = 0.775Vrms
ART maintains a policy of constant product improvement.
Therefore, specifications are subject to change without notice.