Use and Care Manual

Suitable Wall
The basic walls have to be clean, flat, dry, and firm. Aged wall surface has to be primed with
water-based seal primer.
Cut panel
Use the a scroll saw
,
wet saw , blade saw, sharp kitchen scissors, or heavy duty “7” scissors when
meet the corner or electric outlet of the wall
Edge trimming, electric swatch
If the cut edge meets the corner or end of the edge, fill the open edge with sheetrock, compound
caulking, silicone sealant.
Using an electric trim ring outlet frame as assembly in case meets the switch.
Use decorative trim on the sides to achieve finished look if you want.
Paint.
If need paint, paint the paint with the oil paint, recommend spray paint. If no spry, a good brush
is ok.
Recommend paint it before you put them on wall if the paint is necessary.
Glue
Gorilla glue, construction adhesive (just make sure to wipe any excess glue right away if it gets on
the tile surface or on the wall before it dries)