User's Manual

2.4GHz DSSS SPI Radio with Integrated Power Amplifier AW24TH
User Manual
5.0 European Union Regulatory Approval
The European Union generally follows the guidelines of the FCC for emissions level requirements.
FCC end-product compliance certification results, if available, may be used to satisfy EU
requirements (Substitution Method). Please consult the ETSI EN 300 328 specifications to confirm
inter-agency compliance. If comparable FCC testing has not been performed or if the specifications
are not cross compliant, ETSI EN 300 328 testing will be required. Additionally, testing to the ETSI
EN 301 489-1 & ETSI EN 301 489-7 (immunity testing) is strongly recommended. Artaflex
assumes no responsibility for compliance of the end-product configuration.
5.1 Product Labeling Requirements
European Union product labeling requirements stipulate specific text is placed on the device
containing the AW24TH module. The product must include the following text and must be located
on the exterior of the OEM’s product. The same information may be included in the product user
manual, however is not mandatory. Packaging and user documentation must indicate the use
restrictions of the end-product (i.e. countries disallowing the operating frequencies of the
AW24TH). The end-product must be labeled "CE”.
5.2 European Countries recognizing Modular Approval
The following text must be copied exactly into the product’s user’s guide:
“This product contains a radio transmitter with 802.15.4 technology which has been
tested and found to be compliant with the applicable regulations governing a radio
transmitter in the 2.405 GHz to 2.480 GHz frequency range.”
The following countries associated with regulatory agency that recognize the product as authorized
for sale and use are:
Artaflex Inc. UMAW24TH Rev 1v0
215 Konrad Crescent April 24, 2012
Markham, Ontario, Canada
L3R8T9 Page 9 of 10
http://www.artaflexmodules.com
905-479-0148