Guide

18 ｃｍ
10 ｃｍ4ｃｍ 4ｃｍ
10 ｃｍ4ｃｍ 4ｃｍ
0123456789101112131415161718
6
Attach the
connector
plugs
What you need:
How to wrap
the coated
wires
Instructions:
The stripped
coated wires.
Connector
plugs (4)
Danger!!
Warning!!
Cord A
Cord B
Wrap the
coated wire
securely
around the
plug.
Do not
connect the
battery
directly to
the coated
wire.
It will
become
very hot!!
Tip:
Put the coated wire through the hole and wrap it around the plug.
Then, wind the end back on itself as shown.
Wrap it tightly so that the coated wire cannot come loose.
Make Cord A (with two connector plugs attached).
Attach a connector plug to both sides of the coated wire.
Make Cord B (with one connector plug attached).
Connect one end of the coated wire to the connector plug.
Complete
Complete
Preparation for the experiment!