User's Manual

The Connection is for the included DC power adapter. Please use only the provided

adapter.

Using DC Power Jack

Volume Pedal

If necessary it is possible to connect a Volume Pedal or a two pedal system to the

piano, but it is necessary to program the instrument (See Below).

When connecting a pedal, the piano will function accordingly.

SOFT: gives the piano voices a ''lower, softer'' sound.

SOSTENUTO: this allows only the notes pressed on the keyboard before the

Sostenuto pedal is activated to sustain and no subsequent notes played

afterwards.

SUSTAIN: has the same function as the ''sustain'' pedal on the acoustic piano.

It provides sustain and lets the sound slowly decay after the keys have been

released.

Press the [FUNCTION] button repeatedly to select PEDAL , then press

the [ENTER] button to confirm, use [+/-] button

select , [ENTER] button to confirm, the LCD

will display ,use [+/-] button

select , then press the [FUNCTION] button , the LCD will display

[ENTER] button to confirm, use [+/-] button

[ENTER] button,

" ”

"PEDAL3” then press the

"PD3 SOFT” or

"Pd3 EXP”

"PEDAL”,press the or

select then press the

and then

press the the pedal will be set and the LCD wil display

the [DATA CONTROL]

knob to

the [DATA CONTROL] knob to

the [DATA

CONTROL] knob to "EXP SET", press

the [+] button to select "EXP-VAL1", press one side of the pedal, then press

the [-] button to select "EXP-VAL2", press another side of the pedal,

"EXP_OK!"

FUNCTION ENTER

R 1 2

USB DISK

SONG