ZHEJIANG SHUANGYU ELECTRONIC TECHNOLOGY CO.
Basic Features: Product name：LED Panel Rated input：120V～60Hz Rated Power：46W Power Factor：>0.
Assembly instruction: 1、 Install the mounting plat on the junction box; Junction box Mounting plate Junction box screw 2、 Use a crayon to mark the location of the screw hole; Mounting plate Crayon Support screw hole
3、 Remove the mounting plate, drill holes in the marked position with electric drill, and install the wall anchor into the hole; 4、As shown below, install the mounting plate； Mounting plate Junction box screw Retaining screw
、As shown in the figure, hang the hook on the mounting plate and connect the wires as required; Wired hook LED panel White(N) Black(L) LED panel slot Encoche Wire connector Ground wire(G) Meta anchor Mounting plate LED panel
、Assemble the panel light onto the mounting plate as shown； LED panel Metal anchor LED panel slot Mounting plate LED panel
Attention: 1. Before using, please check the line voltage is to meet product voltage, avoiding any wrong voltage to damage product or other risk; 2. The product is irreplaceable, assembly must be electrical technician, when lifetime is ending, please replace the product; 3. Ceiling product yields heat energy, please keep the circumstance around the product in the air flow to help heat consumption. Non-warranty items: 1.
FCC Statement： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
