Specifications

user (u)
User name that VxWorks uses to access host. User
must have read access to boot-image file.
ftp password (pw)
User password. If omitted, then RSH is used instead of
FTP.
flags (f)
Configuration options. Multiple options can be enabled
using hexadecimal sum of values.
0x01 Do not enable system controller
0x02 Load all VxWorks symbols
0x04 Do not auto-boot
0x08 Auto-boot fast (3 count)
0x20 Disable login security
0x40 Use BOOTP to get boot parameters
0x80 Use TFTP to get boot image
0x100 Use proxy ARP
target name (tn)
name of target to be added to host table.
startup script (s)
path of startup script to execute after boot (available
only if target-resident shell is included in download
image).
other (o)
Normally not used.
3.3 Configuring the MDR for Standalone Operation
To configure any MDR unit to operate as a standalone system, allow the MDR unit to
start up and then use the
bootChange command to set the boot parameters as follows:
MDR User Guide 15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com