Specifications

<slot> set to the slot location of the installed device
<Target name> should be set to the MDR Server hostname that will be used to
communicate with the MDR system.
<Ethernet IP address> use an available IP address.
4.5 Configuring the MDR for Shared Memory Network
Operation
To configure an MDR-220 to use an external network gateway provided by a MIDAS-
120 equipped with an Ethernet PMC for example, allow the MDR system to start up and
then use the
bootChange command to set the boot parameters as follows:
boot device : sm=0x10001100
processor number : 1
host name : .
file name : .
inet on ethernet (e) : .
inet on backplane (b) : 192.168.0.101
host inet (h) : .
gateway inet (g) : 192.168.0.100
user (u) : .
ftp password (pw) (blank = use rsh):
flags (f) : .
target name (tn) : <Target name>
startup script (s) : .
other (o) : .
The value sm=0x10001100 for boot device is just an example.
<procnum> processor number which is only used in Shared Memory network, should be
set to a unique integer value for the VME system which is greater than 0 (the processor
number 0 is reserved for the SM gateway).
<Target name> should be set to the MDR Server hostname that will be used to
communicate with the MDR system.
22 MDR User Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com