Specifications

VmeA32Master2Base
Base address (in VME A32 space) of an optional secondary VME master window the
i960 processor of the MIDAS board should set. This master window, and therefore
this item, is required sometimes on the MIDAS side in order to be able to
communicate with some SBCs in SM (For instance, the Power PC boards
MV230X/260X).
[StartUp]
This section contains information the BSP needs to know about the functions to call
after booting.
fncX
Function to be automatically called after booting VxWorks on the MIDAS.
fncXargY
Argument to function X.
The startUp section should have the following items:
fnc1=_sp
fnc1arg1=_MdrServer__Fv
[SCSI]
This section contains information the BSP needs to know about the SCSI PMCs installed
on the MIDAS board.
SCSIUnitXPmcSlot
PMC slot where the SCSI PMC module number X is installed. X is a decimal number
starting at 1 (2, 3, 4…). If no items are specified then the MIDAS BSP will not try to
detect SCSI PMCs.
In the MDR application, this item is used currently to connect a SCSI tape drive. It
should be setup as reference in the MDR standard configurations.
SCSIUnitXPciBaseAdrs
PCI base address where the driver of the SCSI PMC module number X is installed.
The default value for this item is
0x40002000. Do not change the value of this ite
m
unless you are sure of what you are doing!
10.5 VxWorks boot parameters file (vxbp.txt)
The
vxbp.txt file is set up in VxWorks with the program called bootChange. In any
case, the user shouldn’t try to modify this file using any other program.
80 MDR User Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com