Specifications
192-040011 N18
Indexing table control
Automation
18
Parker Hannifin GmbH
Electromechanical Division
COMPAX software variants
In addition to the basic unit (COMPAX XX00) for general positioning tasks, software variants are also
available for special applications
:
Solutions are available for a wide range of applications by configuring a basic unit using add-on modules. This
modular approach allows you to add or change hardware and software options to implement a solution tailored
exactly to your requirements. Each solution is therefore only based on standard hardware. The basic unit for all
variants is the COMPAX XX00M and this is used for general positioning tasks. The application-specific unit
variants can be distinguished from the basic unit by a numerical code which follows the COMPAX name. The
first two digits indicate the power of the output stage, the next two digits describe the application-specific vari-
ants.
COMPAX XXYYZ
COMPAX 1570M therefore represents an output stage with 15kW power (15..) and the "electronic cam control"
variant (..70). COMPAX XX30 represents the "round table control" variant (..30) with an unspecified output
stage (XX..).
Our qualified staff are always available to assist when selecting the appropriate variants.
COMPAX XX30: indexing table control
COMPAX XX30 can be used to position and control
round tables, switching tables and other rotary sys-
tems with high levels of precision.
The positions are programmed in degrees. The di-
rection of rotation may be positive or negative.
In addition to the standard COMPAX command set,
special commands are used for the pitch calculator.
A pitch command can be used to subdivide the table
into equal angle segments.
The position is measured via the resolver installed
on the motor end or a high-resolution sensor. Sup-
port is provided for external position monitoring to in-
crease the positional accuracy.
• External position monitoring possible
• Pitch calculator with up to 1000 steps per revolu-
tion
• Manual fine table setting
E12: output stage enable
E13: measuring error corrected by external position
measurement
E14: release brake
A14: no measuring error
A16: no power to final stage
Product range
M: multiple
axes
Variant code
Code for the
power of the
output stage
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com