Specifications

E-500/E-501 Series PZT Servo Controllers User Manual PZ 62E
Release 2.15.1 www.pi.ws Page 20
5.3. E-503 3-Channel Piezo Amplifier
DANGER
High Voltage!
The E-503 amplifier can output up to 130 V. Touching this High Voltage can result in serious
or even lethal injury due to electric shock.
 Only authorized and qualified personnel must install, operate, maintain and clean the E-
503 amplifier.
 Operate a piezo actuator on a “PZT” socket only when it is connected to a protective earth
conductor.
5.3.1. Front Panel Elements
Fig. 5: E-503.00 amplifier module
Fig. 6: E-503.00S amplifier module
Labeling Type Function
POWER
LED
Green/off
Amplifier state:
 Green: E-503 is ready for normal operation.
 Off: The E-500/E-501 system is switched off.
PZT
-30 to 130 V
LEMO
ERA.00.250.CTL
Output of the piezo voltage for the piezo actuator in the stage.
Voltage in the range of -30 to 130 V.
E-503.00S only:
PZT
100 V
LEMO
ERA.00.250.CTL
Output of the piezo voltage for the piezo actuator in the stage.
Fixed voltage of 100 V for piezo tip/tilt stages.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com