Specifications

E-500/E-501 Series PZT Servo Controllers User Manual PZ 62E
Release 2.15.1 www.pi.ws Page 27
approx. 58 W will be allocated to the internal base load (1.5 μF), while approx. 42 W will be
available for the external piezo load.
With a small-signal capacitance of 1 μF, the piezo actuator would have a large-signal
capacitance of 2 μF, and approx. 57 W would be available for it.
5.4.4. Pin Assignment
32 pin connector, DIN 41612, male
Row PIN a PIN c
2 Power Fail OUT: ch1 (SMB+Offset)*
4 IN: ch1* OUT: ch1 (monitor)
6 Piezo voltage GND Piezo voltage GND
8 OUT: piezo voltage OUT: piezo voltage
10 n.c. n.c.
12 n.c. n.c.
14 IN: sync 200 kHz TTL internal use, Bus_B
16 internal use, Bus_Vcc internal use, Bus_GND
18 n.c. n.c.
20 n.c. n.c.
22 GND (measurement) GND (measurement)
24 GND (power) GND (power)
26 IN: +24 to +27 V IN: +24 to +27 V
28 n.c. n.c.
30 n.c. n.c.
32 Protective earth (chassis) Protective earth (chassis)
* E-504.00S: Pins 2c and 4a are shorted.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com