Specifications

E-500/E-501 Series PZT Servo Controllers User Manual PZ 62E

Release 2.15.1 www.pi.ws Page 43

Labeling Type Function

SERVO x ON/OFF

x stands for the

channel number

Toggle switch Switch for the servo mode selection of the corresponding channel:

 ON: Servo mode is switched on (closed-loop operation)

 OFF: Servo mode is switched off (open-loop operation)

See also “Starting Operation” on p. 17.

SENSOR

MONITOR

LEMO

EGG.0B.306.CLL

Output of the monitor signal(s) for the sensor channel(s).

Pinout on p. 48.

5.8.2. Front Panel Elements of Modules for PISeca Single-Electrode Capacitive

Sensors

Fig. 22: E-509.E3 sensor / servo

controller

Fig. 23: E-509.E03 sensor signal

conditioner

Labeling Type Function

Gnd

Banana socket Ground connection for target plane of the PISeca single-electrode

capacitive sensor.

LEMO

ECP.00.650.NLL.

543, triaxial

Input for the Probe sensor signal of the PISeca single-electrode