Specifications

E-500/E-501 Series PZT Servo Controllers User Manual PZ 62E
Release 2.15.1 www.pi.ws Page 48
SENSOR MONITOR socket of E-509.S3
LEMO socket ERA.0S.303.CLL
The SENSOR MONITOR socket carries the signals
from all three channels.
Each E-509.S3 comes with the E-808.90 sensor-
monitor cable. The purpose of this cable is simply to
split up the signals of the SENSOR MONITOR socket
for the three channels.
The leads of this open-ended cable are color coded:
white = channel 1,
brown = channel 2,
green = channel 3,
shield = GND.
Fig. 27: Three-pin LEMO
sensor monitor socket
SENSOR MONITOR socket of E-509.CxA and E-509.Ex
LEMO socket (FGG.0B.306.CLAD56), 6-pin
pin 1 ch1+
pin 2 ch1-
pin 3 ch2+
pin 4 ch2-
pin 5 ch3+
pin 6 ch3-
shield: GND
Fig. 28 Six-pin
LEMO sensor
monitor socket
Each capacitive sensor version comes with the D-893.32 sensor monitor cable (2 m). The
purpose of this cable is simply to split up the signals of the SENSOR MONITOR socket onto
three separate BNC connectors. The BNC connectors are each labeled with the channel
number.
E-509.S3 32-pin connector, DIN 41612, male
Pin No.
Function
Pin No.
Function
2a
GND
2c
GND
4a
internal use
4c
OUT: ch1 (control)
6a
IN: +15 V
6c
IN: +15 V
8a
IN: -15 V
8c
IN: -15 V
10a
internal use*
10c
internal use
12a
internal use (Bus_A)
12c
OUT: ch2 (control)
14a
OUT: Display ch2
14c
OUT: Display ch1
16a
internal use (Bus_B)
16c
OUT: Display ch3
18a
internal use (BUS_Vcc)
18c
internal use (BUS_GND)
20a
IN: Control ch1
20c
OUT: ch3 (control)
22a
IN: Control ch3*
22c
IN: Control ch2
24a
internal use
24c
internal use
26a
IN: VC/EC ch2
26c
IN: VC/EC ch1
28a
OUT: Overflow ch1
28c
IN: VC/EC ch3*
30a
OUT: Overflow ch3
30c
OUT: Overflow ch2
32a
nc
32c
nc
Note: Pins labeled with "nc" may be used internally and must not be connected externally.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com