Specifications
E-500/E-501 Series PZT Servo Controllers User Manual PZ 62E
Release 2.15.1 www.pi.ws Page 49
E-509.S1 32-pin connector, DIN 41612, male
Pin No.
Function
Pin No.
Function
2a
GND
2c
GND
4a
internal use
4c
OUT: ch1 (control)
6a
IN: +15 V
6c
IN: +15 V
8a
IN: -15 V
8c
IN: -15 V
10a
internal use
10c
internal use
12a
internal use (Bus_A)
12c
nc
14a
nc
14c
OUT: Display ch1
16a
internal use (Bus_B)
16c
nc
18a
internal use (BUS_Vcc)
18c
internal use (BUS_GND)
20a
IN: Control ch1
20c
nc
22a
nc
22c
nc
24a
internal use
24c
internal use
26a
nc
26c
IN: VC/EC ch1
28a
OUT: Overflow ch1
28c
nc
30a
nc
30c
nc
32a
nc
32c
nc
Note: Pins labeled with "nc" may be used internally and must not be connected externally.
E-509.C1A, E-509.C2A, E-509.C3A, E-509.E3, E-509.E03
32-pin connector, DIN 41612, male
Pin No.
Function on
Pin No.
Function on
.C3A, .Ex**
.C2A
.C1A
.C3A, Ex**
.C2A
.C1A
2a
GND
*
*
2c
GND
*
*
4a n.c. * * 4c Control signal output
CH1
* *
6a
+ 15 V
*
*
6c
+ 15 V
*
*
8a
- 15 V
*
*
8c
- 15 V
*
*
10a
n.c.
*
*
10c
n.c.
*
*
12a internal use * * 12c Control signal output
CH2
* n.c.
14a
Display CH2
*
n.c.
14c
Display CH1
*
*
16a
internal use
*
n.c.
16c
Display CH3
n.c.
n.c.
18a
internal use
n.c.
n.c.
18c
internal use
*
*
20a Control signal input
CH1
* * 20c Control signal output
CH3
to JP210,
pin 1
n.c.
22a Control signal input
CH3
to JP210,
pin 2
n.c. 22c Control signal input
CH2
* n.c.
24a
n.c.
*
*
24c
SYNC
*
*
26a
Servo ON/OFF, ch2
*
n.c.
26c
Servo ON/OFF, ch1
*
*
28a
overflow CH1
*
*
28c
Servo ON/OFF, ch3
n.c.
n.c.
30a
overflow CH3
n.c.
n.c.
30c
overflow CH2
*
n.c.
32a
n.c.
*
*
32c
n.c.
*
*
* Same as on E-509.C3A
** E-509.E03 has no servo-controller and hence all servo-related pins are not connected
n.c. : No Connection: may be used on the backplane and must not be connected.
JP210 shorted on E-509.C2A (default): connects CH3 input to CH3 output (i.e. CH3 bypassed)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com