Specifications

E-500/E-501 Series PZT Servo Controllers User Manual PZ 62E
Release 2.15.1 www.pi.ws Page 52
5.9.4. Display Adjustment
NOTICE
Damage from electrostatics!
The E-500/E-501 system contains electrostatic sensitive devices (EGB) and can be damaged
if handled improperly.
 Avoid touching components, pins and PCB tracks.
 Before touching an electronic component, discharge yourself of any electric charges:
− While working, wear an antistatic wrist strap
or
− Briefly touch a conducting, grounded object.
INFORMATION
If ordered as part of a E-500/E-501 system or if PI is informed about the application, E-515.01
and E-515.03 display modules come preset (range, decimal places).
Making the display adjustment elements accessible
Only remove modules from the chassis when you are authorized and have the
corresponding qualifications.
1. Remove the E-500/E-501 system from the power source by pulling the power plug.
2. Wait a minute to be sure that any residual voltage has dissipated.
3. Remove the E-515 module from the chassis:
a) Loosen the four Phillips screws on the front panel.
b) Using the grip at the bottom of the front panel, pull the module out of the chassis.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com