Specifications

CP302 CP-RIO3-01 Rear I/O Module
ID 21112, Rev. 05 Page D - 9® PEP Modular Computers GmbH
D.4.4 Fast Ethernet Interface
Figure D-7: Ethernet/Fast Ethernet Connector
The Ethernet connector is realized as an RJ45 twisted-pair connector.
The interface provides automatic detection and switching between
10Base-T and 100Base-TX data transmission.
D.4.4.1 RJ45 Connector CON2 Pinout
CON2 supplies the 10Base-TX/100Base-TX interface to the Ethernet controller.
D.4.5 Ethernet LED Status
Table D-4: RJ45 Connector CON2 Pinout
RJ45 Signal Function
1 TX+ Transmit +
2 TX- Transmit -
3 RX+ Receive +
4 NC --
5 NC --
6 RX- Receive -
7 NC --
8 NC --
$
$
Important note:
The two green Ethernet LED’s are not active on the CP-RIO3-01.
1
8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com