Specifications

10
F500 Operation Manual/INTRODUCTION
Using This Manual
INTRODUCTION
Processing Item Selection Guide
INTRODUCTION
Processing Item Selection Guide
This software provides various processing items so that you can choose according to your
application.
This section gives guidance regarding what items should be selected for what cases. This is
guidance only. To check whether measurement can be performed correctly, actual
measurement must be performed.
For details on processing items, refer to SECTION 2 Processing items Setting Procedure.
Input image Items Go to p.11
Position Compensation Items Go to p.12
Measurement Items Go to p.13
Positioning (Measurement Objects Not On
An Angle)
Go to p.13
Positioning (Measurement Objects On An
Angle)
Go to p.14
Front/Rear Inspection Go to p.14
Presence/Absence Inspection Go to p.15
Dimensional Inspection/Measurement Go to p.16
Chip/Bur Inspection Go to p.16
Character Reading Go to p.16
Character Verification Go to p.17
Character Inspection Go to p.17
Defect Inspection (Plain Background) Go to p.18
Defect Inspection (Characters, Drawing and
Patterns on Background)
Go to p.19
Quantity Inspection/Measurement Go to p.19
Foreign Matter Inspection Go to p.20
Classification Go to p.20
BGA Inspection Go to p.20
Measurement Support Items Go to p.21
Branching Control Items Go to p.21
Results Output Items Go to p.21
Results Display Items Go to p.22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com