Specifications

11
F500 Operation Manual/INTRODUCTION
Using This Manual
INTRODUCTION
Processing Item Selection Guide
INTRODUCTION
Input image Items
Processing item Remark
Inputting Camera
Images
This section describes how to make the series of settings required when storing conditions
for reading Camera images and storing measurement object images to [Image 0] or
[Image 1].
A Camera image must be read to perform measurements, and Camera image is thus set
for unit 0 by default.Do not delete Camera image from unit 0 or change it to another
processing item.
Switch camera The Switch Camera processing item is used to switch the Camera (image buffer) from
which images will be stored to [Image 0] and [Image 1].
New images are not read from the Camera.
The filtering settings will be changed at the same time.
Changing Filtering The Change Filtering processing item is used to change only the filtering settings for
[Image 0] and [Image 1].
New images are not read from the Camera.
Filtering Again The Filtering Again processing item is used to add filtering to an image.Images can be
sent from [Image 0] to [Image 1] or from [Image 1] to [Image 0] to add filtering to the image
when it is transferred.
This processing item is used if stronger smoothing is required to eliminate noise or
increase edge enhancement.
Camera Image
Camera
0
Image buffer
(for Camera 0)
Camera
1
Image buffer
(for Camera 1)
Camera
2
Image buffer
(for Camera 2)
Camera
3
Image buffer
(for Camera 3)
Camera
selection
Filtering
0
Image 0
Filtering
1
Image 1
Switch camera
Change filtering
Filtering Again
Second
filtering
*: When [Filtering again] is selected
*
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com