Specifications

6
F500 Operation Manual/SECTION 1
Basic operating procedures
SECTION 1
Installing the Application Software
SECTION 1
Selecting Whether to Use the Macro Function
(The following is effective only if the application software has the macro function.)
Select whether to use the macro customize function.
By default, [ON] is selected to use the macro function. If you want to use work memory
for scene data, change the settings to [OFF]. Normally, leave the default setting
selected.
Macro Function
Customize Manual (CD-ROM)
Before starting installation of the application software, select whether to use the macro function.
Once the software is installed, it is not possible to change the setting.
If you want to change the setting, start the setup menu and reinstall the application software.
1. Select [Option].
The macro function selections appear.
2. Select whether to use the macro function.
3. Select [End].
The screen in 1. will return.
• Proceed to in the case of F210/F250/F500.
• Proceed to in the case of F270.
Set up
Select items
Install
Backup data load
Clear memory
Option
Macro: ON
End
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com