Specifications

7
F500 Operation Manual/SECTION 1
Basic operating procedures
SECTION 1
Installing the Application Software
SECTION 1
Selecting a Run Function Mode
F270 provides the following three run function modes. Select an appropriate mode
according to your purpose.
Before starting installation, select a Run Function mode. Once measurement
conditions have been set, it is not possible to change the Run Function mode only.
Details of Run modes
SECTION 3 Test/Measurement Execution
If you want to change the Run Function mode, start the setup menu and reinstall the application
software.
1. Select [F270 function].
The Run Function mode selections will be displayed.
2. Select the desired Run Function mode.
3. Select [End].
The screen in 1. will return.
When the screen in 1. reappears, select [Select items] - [Install].
Selection Details
Nonstop mode Allows you to observe NG images or modify measurement conditions while
continuing measurement.
This eliminates the need to stop the production line for adjustment of
measurement conditions or to wait for the line to stop before adjustment.
Fast mode
(default setting.)
Allows inspections to be performed at a speed of up to a maximum of twice that
of the conventional method. This mode is useful when you want to inspect more
products or to reduce processing time for inspections, such as EC defect
inspection that take a long time.
Random trig mode Allows inspections by receiving two measurement triggers simultaneously.
This allows one controller to perform different inspections simultaneously.
Set up
F270 function
Select items
Install
Backup data load
Clear memory
Option
F270 func. : Fast
End
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com