Specifications

8
F500 Operation Manual/SECTION 1
Basic operating procedures
SECTION 1
Installing the Application Software
SECTION 1
Selecting Installation Processing Items
The application software provides many processing items.Select the processing items
required for the application. Refer to SECTION 2 “Processing Items Setting
Procedures” for an outline of each processing item.
Some items cannot be used depending on the model of the controller to be installed.
Editor's Note, Processing Item Selection Guide
1. Select [Select items].
A list of processing items will be displayed.
To install all the processing items, select [All] and
proceed to
6.
For custom installation, proceed to 2.
2. Move the cursor to the item to be installed.
3. If that item has been set to [OFF], press the
ENT Key.
Set up
Select items
Install
Backup data load
Clear memory
Option
Select items
Input Image
Camera image
Switch camera
Change filtering
Filtering again
Position Compensation
Binary pos. comp
Edge pos. comp
End All Init
ON
ON
ON
ON
OFF
OFF
Return to the initial
settings.
Set all items to
[OFF].
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com