Specifications

11
F500 Operation Manual/SECTION 1
Basic operating procedures
SECTION 1
Installing the Application Software
SECTION 1
The display will return to the main setup menu.
4. Turn OFF the controller's power supply.
5. Remove the Application Software Memory
Card from Memory Card slot 0.
6. Turn ON the controller's power supply.
If the power supply is turned ON while the
Application Software Memory Card is still
mounted, the Setup Menu will be started
again.Always remove the Application Software
Memory Card before starting the Controller.
After a while the Camera Settings Screen will be
displayed.
The displayed screen varies depending on the controller
model.
Proceed to
7. except for F500.
Proceed to
9. in the case of F500.
7. Select the model of the connected Camera.
8. If using intelligent lighting, select its model.
9. Select [End].
SECTION 5 System Settings
The Basic Screen will be displayed.
Set up
Select items
Install
Backup data load
Clear memory
Option
Select items
Input Image
Camera image
Switch camera
Change filtering
Filtering again
Position Compensation
Binary pos. comp
Edge pos. comp
End All Init
ON
ON
ON
ON
OFF
OFF
ON
OFF
Example: F250
Image 0 freeze
---- ---ms
0.Scn 0 MON
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com