Specifications

18
F500 Operation Manual/SECTION 1
Basic operating procedures
SECTION 1
Menu Operations
SECTION 1
Creating Flowcharts
In the Application Software, measurement processing is broken up into different
processing items to facilitate a variety of applications. These are called processing
items.
Flowcharts are created using a combination of processing items to suit each
application.
When Set Mode is entered, the number 1 will be displayed below [0.Camera image].
This number is called the unit number.
[Camera image] is set for unit 0 as the default processing item.
A camera image must be read to perform measurements, so never delete [Camera image] for unit 0
or change it to another processing item.
The processing items are set in order from unit 0.
Once a processing item is set for unit 1, unit 2 will automatically be displayed.
There is no limit to the number of units. Any number of units can be set provided the Controller has
enough free memory.
Checking method for the remaining capacity of work memory (main)
SECTION 5 System Settings, “Checking System Information”
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
0.Camera image
1.
Unit number
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
0.Camera image
1.EC pos. comp
2.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com