Specifications

SITE PREPARATION
4. Shipment boxes or packaging used to package systems and accessories which are
returned to the factory for repair. It is the customer's responsibility to retain original
system packaging.
SITE PREPARATION
It is the responsibility of the customer to prepare the site environmentally and provide
for the required space and services such as power, venting, bottled and compressed
gases, permits, licenses, approvals, etc. Argonaut will supply the customer with
pre-
installation information detailing important site requirements prior to shipment.
INSTALLATION
Installation services are not included in the purchase price of the Quest 2 10. Unless
other contractual agreements have been arranged, it is the responsibility of the customer
to perform the installation as described in the manual provided, as well as provide what
is required to unpack and move the equipment to its location. Contact your local
Argonaut representative for pricing of installation services by a qualified Argonaut
Service Engineer.
After installation, it is the responsibility of the customer to retain any shipment boxes
in the event a system or accessory needs to be shipped for repair.
HOW YOU CAN GET WARRANTY SERVICE ON YOUR QUEST 210
Argonaut has a fully staffed technical support hot line to help you repair minor
problems over the phone,
FAX or email. Major repairs which cannot be handled over
the phone are typically repaired at the nearest Quest
210 repair center. Argonaut does
not perform on site repair of the Quest unless other contractual agreements have been
pre-arranged.
To establish your Quest 210 warranty, you must fill out and mail the warranty return
card, provided in the shipment box, after you have finished the installation.
To qualify for warranty repair you must first contact the appropriate repair center
detailed in the following section.
QUEST 21 0 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com