Specifications

Installation Procedure

Clear a space in a fume hood for the Quest. The space should be about

ft. wide by

ft. deep and be at the left edge of the fume hood. Also, clear a space on the lab bench

adjacent to the fume hood for the controller.

Carefully unpack the instrument and place the Quest Reaction Unit in the hood and the

Quest Controller on the lab bench next to the hood. Remove any packaging material

from the units.

The umbilicus will be connected to the Quest Reactor Unit. Free the umbilicus from any

packing material and lay it out so the free end is placed in front of the Quest Controller

Unit.

Figure

1-1

Quest Controller Unit

QUEST

210

User Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com