Specifications

Argonaut Technologies
The following information provides space, electrical, gas, waste, and ventilation requirements for the
Automated Solvent Wash Option. Adherence to the following will result in trouble free installation.
5.1 Space Requirements
The space requirements for the ASW Controller Unit remain the same as the standard Quest and can
be found in the Quest User Manual. The
ASWM requires bench space that is 17 inches wide,22
inches deep and
18 inches tall within a fume hood. This bench space must be capable of supporting 58
pounds and be located between the Reactor and Controller units. See Figure 1 for the recommended
set-up of a Quest
210 with the Automated Solvent Wash Option.
*tor
Unit ,Automated Solvent Wash Module ,ASW Controller Unit
Figure 1 -Recommended Set-up of a Quest 210 with the Automated Solvent Wash Option
Note: The ASW Controller Unit must be placed external to the fume hood. Sensitive electronic
assemblies could be degraded and/or damaged if placed in an environment with a high level of
chemical vapors.
5.2 Electrical Requirements
The electrical requirements for the ASW Controller Unit are the same as for the standard Quest and
can be found in the Quest manual. Since the ASWM is controlled pneumatically there are no
additional electrical requirements.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com