Specifications

Argonaut Technologies Revision 06/24/98
1.4.1 Preparation and Installation
Unless other contractual agreements have been arranged, it is the responsibility of the customer to
unpack, move the equipment to its location and perform the installation as described in this manual.
Contact your local Argonaut Technologies Representative for pricing of installation services by a
qualified Argonaut Technologies Representative.
Note:
It is the customer's responsibility to retain original system packaging.
1.5
How To Get Warranty Service
Argonaut Technologies has a fully staffed technical support hot line to help you repair minor
problems over the phone, FAX or email. Major repairs that cannot be handled over the phone are
repaired at the nearest Quest 2 10 repair center. Argonaut Technologies does not perform on site repair
of the Quest unless other contractual agreements have been pre-arranged.
1.5.1 Contact Information
Be sure to have the serial number of your Quest ready when you call. It can be found on the
waste tray bracket on the Reactor Unit.
North America:
Argonaut Technologies
887 Industrial Road, Suite G
San Carlos, CA. 94070
Toll free number for USA and Canada:
888.598.1350
PHONE: [phone]
FAX: [phone]
EMAIL: [e-mail]
Web Page address: http://www.argotech.com
Europe: Japan:
Argonaut Technologies A.G.
Argonaut Technologies K.K.
St. Jakobsstrasse 148
MK Komachi Bldg. 4-2- 1
Postfach 43 Kojimachi Chiyoda-Ku,
4 132 Muttenz 2, Switzerland
Tokyo 102, Japan
PHONE: [phone]
PHONE: [phone]
FAX: [phone]
FAX: [phone]
E-MAIL: [e-mail]
Note:
If you have any questions or comments regarding the content of this manual or
instrument installation requirements, please contact Argonaut Technologies at the phone
numbers or e-mail addresses provided above.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com