Specifications

using the white Teflon Drain Lever provided with the Quest to drain all

RVs

parallel.

Drain Gas Metered Gas

Utility

Leaving the Lower Manifold Drain Valves open, turn off the Drain Gas (set the

left valve to "CLOSED") and

turn

on the METERED GAS.

Note-

not

turn

the Manifold Control Valves to "DRAIN GAS" and "METERED GAS"

simultaneously.

Drain Gas Metered Gas

Utility

c. Turn both Manifold Control Valves to "CLOSED and close the Lower Manifold

Drain Valves by flipping the Drain Levers upward.

Drain Gas Metered Gas

Utility

Remove the glass waste tank and dispose of the solvent waste. To remove the glass

waste tank, push the silver buttons on the handles of the collection tray (located

below the Lower Manifold of the Reactor Unit) and slowly slide the collection tray

down to its lowest position. Remove the waste tank and dispose of the waste in

accordance with local laws and regulations.

With an appropriate solvent, rinse the underside of the Lower Manifold where the

Teflon lines for fraction collection are located. It is recommended to use a volatile

solvent such as acetone. Carefully dry the area with a Kimwipe or laboratory towel

taking care not to bump or bend the Teflon collection lines.

To reinstall the glass waste tank, place the empty tank onto the collection tray and

slide the tray into position

via

the silver buttons located on the collection tray handles.

The silver buttons will snap out to verify that the waste tank is locked into position.

Argonaut Technologies

Part

Number 102298

04/02/98

Quest Tutorial

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com