Specifications

Two plugs: for the "T" when the gas manifold is not in use, and for the Gas
Out B port when the Expansion Kit is not in use (part number 100083)
114 inch ID tubing for solvent trapping, 3 feet (part number 103954)
Barbed fitting adapter (114 - 318 inch) for solvent trap (part number 103669)
I
I
Figure 1: GRCM - Three Main Components
PARTS SUPPLIED BY USER
The user must provide the following items:
An external gas tank for gaseous reagents, with a 0-30 psig
(1.01-3.08 barr) regulator to control the input pressure.
Nitrogen gas for sparging. A house-supply is preferred.
A solvent recovery condensor. Suggested parts for the solvent condensor
(available from ChemGlass):
- 2-Neck 24140 round-bottom flask (CG-1520-04)
- Dewar type condenser (CG-1290-A-26)
- Inner joint 24/40 Adapter (CG-1014-01)
GRCM - User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com