Specifications

T
his chapter describes the application of the Quest Gaseous Reaction
and Concentration Manifold when used with the Quest 210 in two
processes: Hydrogenation, and Concentration by Evaporation.
Hydrogenation requires the Control Box and the Gas Delivery Manifold.
Concentration requires the Control Box, the Gas Delivery Manifold and the
Solvent Trap Manifold, together with a user-supplied solvent trap.
Before attempting to follow the steps in this chapter, you must be familiar
with the installation procedures described in Chapter
3 "GRCM
Installation".
HYDROGENATION
11111111111111l1111IIII#IIIIIIII1IIIIIII11l1tI1lllll
This section describes an example of a procedure for hydrogenation. It is
intended solely as an example and should not be interpreted as a definitive
or recommended method.
Set up The figure below shows the setup in schematic form. For details of
the installation procedures, see Chapter
3 "GRCM Installation".
GRCM - User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com