MSDS

MATERIAL SAFETY DATA SHEET
Artisan Metal Restorer
Page 5 of 6
SECTION 12: ECOLOGICAL INFORMATION
No data is available on the product or the components.
SECTION 13: DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD: Dispose in accordance with all local, state and federal regulations.
SECTION 14: TRANSPORT INFORMATION
DOT SHIPPING NAME: Phosphoric Acid Solution
DOT HAZARD CLASSIFICATION: Class 8, PGIII (Corrosive material)
DOT LABELS REQUIRED (49CFR172.101): Corrosive
UN NUMBER: UN1805
Note: If >50,000 pounds of this product in a single container, RQ requirements apply.
Containers not over 5 L (1.3 gal) may be reclassified as a Consumer Commodity, ORM-D if
intended for consumer use.
SECTION 15: REGULATORY INFORMATION
OSHA HAZARD CLASSIFICATION: Corrosive
EPA SARA 302: This product does not contain chemicals regulated under SARA Section 302.
EPA SARA 311 HAZARD CLASSIFICATION: Acute health, Chronic Health
EPA SARA 313: This product contains the following chemicals regulated under SARA Title III,
section 313:
2-Butoxythanol 1-5% 111-76-2
(Glycol Ether Compounds)
CERCLA Hazardous Substances (Section 103)/RQ: Spills of this product over the RQ (reportable
quantity) must be reported to the National Response Center. The RQ for the product, based on the
RQ for Phosphoric Acid (20% maximum) of 5,000 lbs, is 25,000 lbs. Many states have more stringent
release reporting requirements. Report spills required under federal, state and local regulations.
TOXIC SUBSTANCES CONTROL ACT: All of the components of this product are listed on the
TSCA inventory.
CALIFORNIA PROPOSITION 65: This product contains the following chemicals which are known by
the State of California to cause cancer or reproductive toxicity (birth defects): None