SDS

ManualsBrandsArtisan ManualsPaint1-gal. Poly Haze Remover

Artisan® Poly Haze Remover

Safety Data Sheet

Page 1 of 5

Section 1. Identification

Product Name: Artisan® Poly Haze Remover

Product Code:

Recommended use: Masonry, brick and pavers

Restrictions on use: Use only as directed

Manufacturer Name:

Address:

Telephone number:

Chemique, Inc.

315 N. Washington Avenue

Moorestown, NJ 08057

(856) 235-4161

Emergency phone number: (800) 535-5053 (Infotrac)

Date of Preparation: September 5, 2013

Section 2. Hazard(s) Identification

Note: This product is a consumer product and is labeled in accordance with the US Consumer Product Safety

Commission regulations which take precedence over OSHA Hazard Communication labeling. The actual

container label will not include the label elements below. The labeling below applies to industrial/professional

products.

Classification:

Physical

Health

Metal Corrosion Category 1

Eye Damage Category 1

Danger!

Hazard statement(s)

Precautionary statement(s)

May be corrosive to metals.

Causes serious eye damage.

Keep only in original container.

Wear eye protection and face protection.

IF IN EYES: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do. Continue

rinsing.

Immediately call a POISON CENTER.

Absorb spillage to prevent material damage.

Store in corrosive resistant container with a corrosive

resistant inner liner.

Summary of content (5 pages)

PAGE 1
Artisan® Poly Haze Remover Safety Data Sheet Section 1. Identification Product Name: Artisan® Poly Haze Remover Product Code: Recommended use: Masonry, brick and pavers Restrictions on use: Use only as directed Manufacturer Name: Address: Telephone number: Chemique, Inc. 315 N. Washington Avenue Moorestown, NJ 08057 (856) 235-4161 Emergency phone number: (800) 535-5053 (Infotrac) Date of Preparation: September 5, 2013 Section 2.
PAGE 2
Artisan Efflorescence Remover 9/5/13 Section 3. Composition / Information on Ingredients Chemical name Organic Acid Salt Surfactant Blend CAS No. 506-89-8 Mixture Concentration 10-20% 1-10% The specific identity and/or exact percentage (concentration) of composition has been withheld as a trade secret. Section 4. First-Aid Measures Inhalation: Remove victim to fresh air. If breathing has stopped give artificial respiration. If breathing is difficult have qualified personnel administer oxygen.
PAGE 3
Artisan Efflorescence Remover 9/5/13 Section 7. Handling and Storage Precautions for safe handling: Prevent eye contact. Avoid prolonged skin contact. Do not breathe spray mists. Use with adequate ventilation. Use only with appropriate protective equipment. Immediately remove and launder contaminated clothing before re-use. Wash thoroughly after handling and before eating, drinking, smoking or using toilet facilities. Keep out reach of children. Empty containers retain product residues.
PAGE 4
Artisan Efflorescence Remover 9/5/13 Section 10. Stability and Reactivity Reactivity: Not reactive under normal conditions of use. Chemical stability: Stable Possibility of hazardous reactions: Contact with metals may produce flammable hydrogen gas. Conditions to avoid: Heating above 230°F may result in an exothermic decomposition with rapid release of carbon dioxide gas. Incompatible materials: Avoid oxidizing agents, alkaline materials, chlorate, nitrates and hypochlorites.
PAGE 5
Artisan Efflorescence Remover 9/5/13 Section 13. Disposal Considerations Dispose in accordance with all local, state and federal regulations. Section 14. Transport Information UN Number DOT Proper shipping name Hazard Class Packing Group Not Regulated Environmental Hazard None *This material is corrosive to aluminum. It is not corrosive to skin or mild steel. Transport in bulk (according to Annex II of MARPOL 73/78 and the IBC Code): Not applicable – product is transported only in packaged form.